| 402 | 2 | 40 |
| 下载次数 | 被引频次 | 阅读次数 |
着重研究了工作温度范围为20~77K的低温热敏电阻器的生产工艺参数。利用先进的半导体陶瓷工艺,合成了新的低温NTC热敏陶瓷材料SrCoO3-δ,并用不同量的Ni取代Co对其掺杂改性,得到了不同阻值、不同B值的陶瓷材料,同时研究了烧结温度和恒温时间对Co-Ni-Sr-O系NTC热敏材料参数的影响。在材料粉体合成中,采用固相烧结、共沉淀法、溶胶凝胶法、Pechini法等不同方法制备,讨论了不同方法的基本原理与特点,并对一些具体制备方法进行了比较。
Abstract：The research focuses on the technical conditions of low temperature NTC thermistor which works at 20~77 K.With advanced semiconducting technological process,a low temperature thermistor SrCoO3-δ was synthesized. Doping SrCoO3-δ with Ni to replace Co,the different electrical resistance and the different B value of samples were gained.Meanwhile the increasing sintering temperatures and the soaking time influence on the electrical resistance and the B value of samples were researched.The different preparation methods were attempted to synthesize the powder,including simply solid state sintering,co-deposition,sol-gel and Pechini,and the basic theory and features were discussed and compared.
[1]曲远方.功能陶瓷及应用[M].北京:化学工业出版社,2003:281.
[2]干福熹.信息材料[M].天津:天津大学出版社,2000:227.
[3]徐开先,叶济民.热敏电阻器[M].北京:机械工业出版社,1983:9.
[4]王恩信,荆玉兰,王鹏程,等.NTC热敏电阻器的现状与发展趋势[J].电子元件与材料,1997,16(4):1-8.
[5]王卫民,赵鸣,张慧君,等.NTC热敏电阻材料组成及制备工艺研究进展[J].材料科学工程学报,2005,23(2):286-289.
[6]莫以豪,李标荣,周国良.半导体陶瓷及其敏感元件[M].上海:上海科学技术出版社,1983:177-220.
[7]PARDOA V,BLAHAB P.Bandstructure study of magneticand orbital order in BaCoO3[J].J Magn and Magn Mater,2005,290-291:349-352.
[8]JAMES M,CASSIDY D,WILSON K F,et al.Oxygen per-mea-tion in the system SrFeO3-x-SrCoO3-y[J].Solid State Sci,2004,6(7):655-662.
[9]WIIK K,AASLAND S,HANSEN H L,et al.Oxygen per-mea-tion in the systemSrFeO3-x-SrCoO3-y[J].Solid State Io-nics,2002,152-153:675-680.
[10]兰玉岐,妥万禄,常爱民.SrCo1-xNixO3-δ陶瓷材料的微结构和电性能[J].功能材料与器件学报,2007,13(1):63-67.
基本信息:
DOI：10.13250/j.cnki.wndz.2007.z1.031
中图分类号:TQ174.1
引用信息:
[1]杨阳,妥万禄,常爱民,等.Co-Ni-Sr-O系低温热敏陶瓷材料研究[J].微纳电子技术,2007,No.362,No.363(Z1):91-94+107.DOI:10.13250/j.cnki.wndz.2007.z1.031.
2007-08-15
2007-08-15