| 589 | 8 | 17 |
| 下载次数 | 被引频次 | 阅读次数 |
研究了CoMnNiO系负温度系数热敏电阻陶瓷材料的烧结特性和电性能,探讨了不同烧结方法对CoMnNiO系NTC热敏陶瓷烧结特性及电性能的影响。试验结果表明,微波烧结的样品成瓷均匀、致密,且晶粒较小。对其电性能进行研究发现:同样温度下微波烧结制备的热敏元件B值、阻值一致性较常规烧结方法有较大提高。由此可见,微波烧结技术在制备热敏电阻陶瓷材料方面具有潜在的优势。
Abstract：The sintering activity and electrical properties of CoMnNiO based ceramic were studied.The effects of differents sintering methods on the sintering activity and electric characters of CoMnNiO were investigated.Compared with the conventional sintering,the samples prepared by microwave sintering have homogeneous density microstructure,fine grain size.Electrical properties indicate that microwave sintering improves the negative temperature coefficient(NTC) thermistor's B constant and resistance.It's concluded that microwave sintering method has potential superiority on synthesis NTC ceramic material.
[1]DIPIKA S,SHARMA A D,SEN A,et al.Preparation ofbixbyite phase(MnxFe1-x)2O3for NTC thermistor applica-tions[J].Mater Lett,2002,55:403-406.
[2]GUILLEMET-FRITSCH S,JAOUAD S,JOSEPH S,et al.Mechanical properties of nickel manganites-based ceramicsused as negative temperature coefficient thermistors(NTC)[J].Mater Res Bull,2004,39(12):1957-1965.
[3]王恩信,荆玉兰,王鹏程,等.NTC热敏电阻器的现状与发展趋势[J].电子元件与材料,1997,16(4):1-9.
[4]MINAMI T,SATO H,TAKATA S,et al.Large-area milkytransparent conducting Al-doped ZnO film prepared by magne-tron sputtering[J].Jap J Appl Phys,1992,31:1106-1109.
[5]MARTIN J L,VIDALES D,GARCIA-Chain P,et al.Prepa-ration and characterization of spinel-type Mn-Co-Ni-O negativetemperature coefficient ceramic thermistors[J].Journal of Ma-terial Science,1998,33:1491-1496.
[6]王卫民,高峰,赵鸣,等.非晶态羧酸盐法合成NTC热敏陶瓷用Ni1.0Co0.2Mn1.8O4纳米粉体的研究[J].无机化学学报,2006,22(3):515-518.
[7]庄建文.共沉淀法NTC纳米粉体及热敏材料制备的研究[D].中国科学院新疆物理所,2001.
[8]高瑞平,李晓光.先进陶瓷物理与化学原理及技术[M].北京:科学出版社,2001:126-127.
基本信息:
DOI：10.13250/j.cnki.wndz.2007.z1.058
中图分类号:TN305
引用信息:
[1]张惠敏,常爱民,赵青.CoMnNiO系NTC热敏半导体陶瓷烧结特性与电性能研究[J].微纳电子技术,2007,No.362,No.363(Z1):95-97.DOI:10.13250/j.cnki.wndz.2007.z1.058.
基金信息:
乌鲁木齐市科技攻关资助项目(G06211002)
2007-08-15
2007-08-15