| 75 | 2 | 29 |
| 下载次数 | 被引频次 | 阅读次数 |
在醇基介质中采用阳极氧化方法成功在Ti6Al4V合金表面制备出大面积的α和β相均为纳米管结构阵列。通过扫描电子显微镜(SEM)和X射线能谱仪(EDXA)对纳米管阵列的表面形貌、微结构和热稳定性进行了表征。实验结果表明:在醇基溶液中采用阳极氧化方法制备大面积纳米管阵列时,外加电压的增加有利于合金表面多孔纳米结构的形成。在外加电压为30V时,Ti6Al4V合金表面的双相区均获得较为均匀的纳米管阵列。Ti-Al-V-O纳米管阵列管长约900nm、管径约90nm、壁厚约7.4nm。EDXA结果表明:在阳极氧化后,表面Al和V含量降低。Ti-Al-V-O纳米管阵列在550℃下晶化后,其表面形貌可保持规则的纳米阵列结构,而在更高温度下热处理可导致纳米管阵列局部坍塌并发生表面烧结致密化现象。
Abstract：Large area nanotube arrays were successfully fabricated on the surface of Ti6Al4V alloy with the anodization in the alcohol group electrolyte.The surface morphology,microstructure and thermal stability of the nanotube arrays were characterized by the scanning electron microscope and energy dispersive X-ray analysis.The experimental results indicate that the applied voltage has the benefit for the formation of the porous nano structure at the surface of the alloy,when the large area nanotube arrays are fabricated with the anodization method in the alcohol group solution.When the anodization voltage increased to 30 V,regular nanotube arrays were obtained at the α and β phases of the alloy substrate.The length of the nanotube is approximately 900 nm,the diameter is about 90 nm,and the wall thickness is about 7.4 nm.The EDXA result shows that Al and V contents at the alloy surface are reduced after the anodization.Regular nanotube array structure of the surface morphology can be maintained after 550 ℃ heat treatment for crystallization.However,higher temperature heat treatment can lead to partial collapse or surface sintering densification for the nanotube arrays.
[1]SHAW G A,TRETHEWEY J S,JOHNSON A D,et al.Thermomechanical high-density data storage in a metallic ma-terial via the shape-memory effect[J].Adv Mater,2005,17(9):1123-1127.
[2]KUJALA S,RYHANEN J,JAMSA T,et al.Bone modelingcontrolled by a nickel-titanium shape memory alloy intramedul-lary nail[J].Biomaterials,2002,23(12):2535-2543.
[3]KAWAKITA J,STRATMANN M,HASSEL A W.High vol-tage pulse anodization of a NiTi shape memory alloy[J].JElectrochem Soc,2007,154(6):C294-C298.
[4]FENG X J,MACAK J M,ALBU S P,et al.Electrochemicalformation of self-organized anodic nanotube coating onTi-28Zr-8Nb biomedical alloy surface[J].Acta Biomaterialia,2008,4(2):318-323.
[5]WONG M H,CHENG F T,MAN H C.Characteristics,apa-tite-forming ability and corrosion resistance of NiTi surfacemodified by AC anodization[J].Appl Surface Sci,2007,253(18):7527-7534.
[6]TSUCHIYA H,AKAKI T,NAKATA J,et al.Anodic oxidenanotube layers on Ti-Ta alloys:substrate composition,mi-crostructure and self-organization on two-size scales[J].Cor-ros Sci,2009,51(7):1528-1533.
[7]TSUCHIYA H,MACAK J M,GHICOV A,et al.Nanotubeoxide coating on Ti-29Nb-13Ta-4.6Zr alloy prepared by self-organizing anodization[J].Electrochimica Acta,2006,52(1):94-101.
[8]MACAK J M,TSUCHIYA H,TAVEIRA L,et al.Smoothanodic TiO2nanotubes[J].Angew Chem Int Edit,2005,44(45):7463-7465.
[9]VARGHESE O K,GONG D,PAULOSE M,et al.Extremechanges in the electrical resistance of titania nanotubes with hygro-gen exposure[J].Adv Mater,2003,15(7/8):624-627.
[10]CHU C L,WANG R M,YIN L H,et al.Effects of anodic oxi-dation in H2SO4electrolyte on the biocompatibility of NiTi shapememory alloy[J].Mater Lett,2008,62(20):3512-3514.
[11]YASUDA K,SCHMUKI P.Formation of self-organized zir-conium titanate nanotube layers by alloy anodization[J].AdvMater,2007,19(13):1757-1760.
[12]BAI S,DING D,NING C,et al.Anodic growth of uniformnanotube arrays on biphase Ti35Nb5Zr alloy[J].ElectrochemCommu,2010,12(1):152-155.
基本信息:
中图分类号:TB383.1
引用信息:
[1]黎朝晖,丁冬雁,宁聪琴,等.Ti-Al-V-O纳米管阵列的制备与热稳定性研究[J].微纳电子技术,2011,48(12):773-776+781.
基金信息:
国家高技术研究发展计划(863计划)资助项目(2006AA02A1);; 国家自然科学基金资助项目(60641004);; 上海市浦江人才计划资助项目(07pj14047)
2011-12-15
2011-12-15